How to test the roller sanding machine?

roller sand making machine

The roller sand making machine is a commonly used equipment for ore crushing and sand production. It has the characteristics of high efficiency and energy conservation, and is therefore widely used in the mining and construction industries. However, it is very important to conduct a trial run before use to ensure the normal operation and safety of the equipment. Next, we will introduce the trial operation steps of the roller sand making machine.
Firstly, before conducting a test run, it is necessary to conduct a comprehensive inspection and maintenance of the equipment. Check whether all components of the equipment are intact, especially the transmission system, lubrication system, and electrical system of the roller sanding machine, to ensure their normal operation. At the same time, it is also necessary to check whether the safety protection devices of the equipment are complete and effective to ensure the safety of the operators.
Next, it is necessary to conduct a no-load test run of the roller sanding machine. Firstly, turn on the power of the device and start each component in sequence according to the device's startup sequence. During the startup process, it is necessary to carefully observe the operation of the equipment to ensure that all components are functioning properly and there are no abnormal sounds or vibrations. At the same time, it is also necessary to check whether the lubrication system of the equipment is working properly to ensure that the lubrication of the equipment is in good condition.
During the no-load test run, it is also necessary to observe whether the current and voltage of the equipment are stable, and whether the temperature of the equipment is normal. If any abnormalities are found, the machine should be immediately shut down for inspection and necessary adjustments and repairs should be made.
After the no-load test run shows no abnormalities, the loaded test run can be carried out. Firstly, put an appropriate amount of ore or sand into the roller sand machine, and then start the equipment according to the operating requirements of the equipment. During the loaded trial operation process, it is also necessary to carefully observe the operation of the equipment to ensure that all components of the equipment work properly and that the crushing and sand making effects meet the requirements.
During the trial operation process, it is also necessary to pay attention to the load situation of the equipment to ensure that the load of the equipment is within the normal range. If the load is too large or too small, it may affect the normal operation and service life of the equipment.
In summary, conducting trial operation of the roller sand making machine is an important step to ensure the normal operation and safety of the equipment. Through comprehensive inspection and maintenance, as well as no-load and on-load test runs, problems with the equipment can be identified and resolved in a timely manner, ensuring its stability and reliability. Only after the equipment passes the trial operation can it be safely put into actual production.