How to adjust the slow discharge speed of the roller crusher equipment during operation?

roller crusher

Slow discharge of the roller crusher equipment during operation may affect production efficiency, and timely adjustments are needed to ensure efficient and stable operation of the equipment. Here are some common adjustment methods:
Check the material condition in the crushing chamber: Firstly, check if there are any blocked materials or excessive fine powder in the crushing chamber, clean up the blocked materials, and avoid excessive accumulation of fine powder affecting the discharge.
Adjusting the roller gap: The roller gap of the roller crusher has a significant impact on the discharge particle size. If the gap between the rollers is too large, it will lead to insufficient crushing and poor discharge; If it is too small, it will increase the equipment load and even cause equipment failure. Therefore, according to the hardness and discharge requirements of the crushed material, adjust the gap between the rollers reasonably.
Check the wear of the rollers: If the surface of the rollers is severely worn, it will affect the crushing effect and cause poor discharge. Regularly check the wear of the rollers, replace or repair them in a timely manner according to the actual situation, and maintain their normal working condition.
Adjusting the feeding device: Ensure the stability and accuracy of the feeding device, maintain appropriate feeding speed and uniformity, to ensure that the material in the crushing chamber is evenly stressed, and avoid slow or uneven discharge.
Strengthen lubrication and maintenance: do a good job in equipment lubrication and maintenance to ensure the normal operation of the equipment. Regularly maintain and inspect the equipment to ensure the flexible operation of all components and reduce slow discharge issues caused by equipment failures.
Adjusting the feeding speed: Adjust the feeding speed appropriately to match the processing capacity of the equipment, and avoid material accumulation in the crushing chamber caused by excessive feeding speed, which affects the discharge effect.
Timely cleaning of dust: Regularly clean the dust around and inside the equipment to ensure good ventilation of the crusher and prevent dust accumulation from affecting the normal operation of the equipment.
There may be multiple reasons for the slow discharge of the roller crusher equipment, which need to be checked and adjusted one by one. Regular maintenance and upkeep are crucial for the stable operation of the equipment. At the same time, adjusting parameters such as roller clearance and feeding speed according to specific circumstances can effectively solve the problem of slow discharge and improve the working efficiency of the equipment.