The discharge particle size of the crusher equipment is not uniform how to do?

Uneven discharge particle size is one of the faults often encountered in the production process of the crusher, so when the crusher discharge particle size is not uniform how to do?

1, broken parts wear easily lead to uneven discharge

Due to the harsh working environment and the hardness of the broken material, the broken parts will have certain wear during the crushing process. After wear, the gap between the moving jaw and the bearing will become larger, and the bearing will have relative rotation, which not only affects the crushing efficiency, but also leads to the uneven discharge particle size. Therefore, in the crusher work for a period of time, to carry out regular maintenance, if the broken parts wear should be immediately replaced on the moving jaw and bearing, so that the broken particle size uniform.

2, the movement of the jaw plate is easy to lead to uneven discharge

In the crushing process, if it is found that the position of the jaw plate moves, the tooth root corresponding to the tooth tip moves, and the tooth tip is opposite to the tooth tip, the crushing particle size will be different. At this time, the size of the tooth pitch of the tooth plate should be checked. If the size fails to meet the specified standard, the jaw plate must be replaced, and then the movable jaw plate and the fixed jaw plate must be adjusted to the appropriate position to ensure that the tooth tip is opposite the tooth root. After adjusting all the positions, it is fixed and pressed tightly, so that the position does not move.

3, lack of power easily lead to uneven discharge

Power can maintain the normal operation of the machine, is the source of all power, the lack of power of the crusher may affect the normal operation of the machine, resulting in low discharge particle size, discharge particle size is not uniform, when the power of the crusher is insufficient, the voltage should be adjusted to work, so that the host can operate normally when working.

4, the size of the discharge port is easy to lead to uneven discharge

The discharge port corresponding to the different discharge particle size is also different, according to the size of the discharge particle size, timely adjust the size of the discharge port of the crusher.