How to improve the production capacity of jaw crushers?

The jaw crusher is one of the important equipment in the crushing production line, and its production capacity directly affects the efficiency of the entire production line. To improve the production capacity of jaw crushers, the following aspects can be taken into consideration:

1. Control the feeding amount and particle size

When feeding, it should be added according to the production situation and kept evenly distributed. Avoid non crushing materials such as oversized or hard particles, materials with high moisture content, or iron blocks from entering the crushing chamber. These factors will all affect the production capacity of the jaw crusher.

2. Adjust the size of the discharge port

Adjusting the size of the discharge port in a timely manner based on the nature of the feed can help improve production capacity and prevent machine blockage. The size of the discharge port can generally be adjusted between 10mm and 300mm.

3. Choose crushing equipment accessories with good wear resistance

The better the wear resistance of the broken parts (hammer, jaw) of the crushing equipment, the greater the crushing capacity. If the wear resistance is poor, it will affect the crushing capacity of the jaw crusher. Therefore, when selecting crushing equipment, attention should be paid to selecting accessories with good wear resistance.

4. Select the right equipment and place the right materials

Material jamming will seriously reduce the production capacity of the jaw crusher. When using equipment, it is necessary to choose equipment models that are suitable for the properties of the materials, and set machine parameters, discharge port size, and feeding amount reasonably. In addition, it is necessary to avoid excessive feeding to prevent equipment jamming.

By using the above methods, the production capacity of the jaw crusher can be effectively improved, and the efficiency of the entire crushing production line can be improved.