How to avoid high temperatures in the roller sand making machine?

The roller sand making machine is a commonly used industrial equipment used to process raw materials into fine particle products. However, due to long-term operation and high-speed friction, the roller sand machine is prone to high temperatures, which may cause damage to the equipment and operators. To ensure the normal operation of the equipment and the safety of operators, the following are some methods to avoid high temperatures on the roller sand making machine.

Roller sand making machine

1. Regular inspection and maintenance: Regularly inspect all components of the roller sand making machine to ensure they are in good working condition. Pay special attention to bearings, lubrication systems, and cooling systems to ensure their normal operation. Regularly replace severely worn components to reduce friction and heat generation.
2. Maintain appropriate lubrication: Proper lubrication is required for the bearings and other moving parts of the roller sand making machine to reduce friction and heat generation. Use lubricants suitable for the equipment and lubricate according to the manufacturer's recommendations. Regularly inspect the lubrication system to ensure sufficient supply of lubricants.
3. Strengthening the cooling system: The cooling system of the roller sand making machine is crucial for reducing equipment temperature. Ensure the normal operation of the cooling system and sufficient supply of coolant. Regularly clean the cooling system to prevent blockage and accumulation of dust from affecting the cooling effect.
4. Control the feeding speed: Excessive feeding speed will increase the load on the roller sand machine, leading to the generation of high temperatures. According to the rated load and operating requirements of the equipment, control the feeding speed to avoid excessive load and high temperature.
5. Regular cleaning of equipment: During use, the roller sand making machine may accumulate dust and impurities, which can affect the normal operation of the equipment and increase friction. Regularly clean the equipment to ensure its surface is clean and to remove accumulated dust and impurities.
6. Increase ventilation and heat dissipation: Adding appropriate ventilation facilities around the roller sand making machine can help dissipate heat and reduce equipment temperature. Ensure that there are no obstructions around the equipment for air circulation.
7. Training operators: Operators of roller sand machines should receive relevant training to understand the working principles and safety operating procedures of the equipment. Operators should regularly check the temperature of the equipment and take necessary measures to avoid high temperatures.
In short, avoiding high temperatures on roller sand machines requires regular inspection and maintenance of equipment, proper lubrication, strengthening of cooling systems, control of feed speed, regular cleaning of equipment, increased ventilation and heat dissipation, and training of operators. By taking these measures, the normal operation of the roller sand making machine and the safety of operators can be ensured.