Choose Africa Double toothed roller crusher manufacturers with good customer feedback to collaborate with

→Graphical Introduction Information of Double toothed roller crusher←

Jushang Machinery is a Double toothed roller crusher service provider with continuous focus in the coal field, Break through the old pattern and create a new future! Jushang Machinery, who has adhered to the coal industry for many years, has rich industry experience in the application of Double toothed roller crusher! If you want to know more Kenema Double toothed roller crusher technical information, you can call +86-13526515820 to get more information immediately!

    With ingenuity, we can produce craftsmanship and deepen Jushang Double toothed roller crusher product knowledge points in coal:Double toothed roller crusher: a crushing equipment mainly used for crushing hard materials such as ores, stones, etc. The double toothed roller crusher has two relatively rotating toothed rollers, and the material is crushed between the toothed rollers.
At present, the most advanced crusher technology in limestone mine is to use jaw crusher for primary crushing and double-geared roller crusher for secondary crushing. Compared with other secondary crushers, the lump forming rate of the output of the double-geared roller crusher is increased by 15% - 25% (3cm ~ 9cm blocks), which can improve the economic value. According to the different hardness of limestone, the double-geared roller crusher has many advantages such as high reliability, strong stability and good performance on saving cost. Our gear roller is made of Babbitt high-strength wear-resistant alloy, and its service life is 2-3 times longer than that of common material. According to the current customer use, the spare parts need to be replaced after 3-5 years of use. The replacement cycle of spare parts is long and the continuous production is reliable.
The machine is suitable for building materials, cement, chemical, refractory, coal, mineral processing, sinter, silicate, glass, abrasives, ceramics and other industrial sectors, can handle a variety of medium and high hardness (160Mpa below) ore and rock crushing and fine crushing. Roller crusher can handle materials are: steel slag, river pebbles, pebbles, calcite, quartz, glass, marble, bentonite, bluestone, steel slag, limestone, weathered sand, granite, basalt and so on. Especially in the sand making industry and building materials industry, it has a good effect on small materials, and has great advantages compared with other crusher equipment.
coal industry Double toothed roller crusher more application experience can be obtained for free by picking up the phone and immediately consulting Jushang Machinery technicians.
The roller crusher mainly uses two sets of independently driven rollers to break materials through the extrusion and grinding force generated by relative rotation. The material falls between the two rollers through the feed port, and the finished product falls naturally after being crushed by the pair of rollers. When encountering hard or unbreakable materials, the roller can automatically retreat under the action of the hydraulic cylinder or spring, so that the gap between the two rollers increases, and the hard or unbreakable materials naturally fall to ensure that the machine is not damaged. By adjusting the pressure of the hydraulic cylinder or spring, the pressure between the two rollers increases or decreases to control the size of the finished product, and the greater the pressure, the smaller the finished product.