How to properly maintain the sand washing machine to extend its service life

As an auxiliary equipment in the sand production line, the sand washing machine uses water washing to remove impurities from the materials. How to achieve good results and extend the service life of sand washing machines? We must perform the following actions:
1. Special training should be provided to the operators of the sand washing machine to understand the structure and working principle of the washing equipment, and to proficiently control the operation process of the equipment. Although the operation of the sand washing machine is simple, in practical operation, the operation of coarse branches and large leaves should not be stopped to avoid equipment operation problems caused by improper operation and shorten the service life of the sand washing machine.
2. Daily maintenance. Of course, the sand washing equipment consumed by Star Equipment is very easy to maintain. Do not put irregular materials into the sand washing machine. After each use, please clean the remaining mud in the bucket. Clean the sand and keep it ventilated and dry to ensure that there are no debris when the machine is turned on again, to ensure that the equipment operates normally.
3. Rust removal. The equipment material is usually stainless steel, but sometimes it is steel. If the material is steel and the environment of the sand washing machine is extremely harsh, it is easy to rust when in contact with moisture. When the sand washing machine rusts, it must be cleaned in a timely manner, otherwise it will cause the sand washing machine to age and shorten its service life.
4. Regularly inspect the sand washing machine to ensure its normal operation. Especially the smoothness of smooth parts, the tightness of the V-belt, the level of gear fit, and the operation of the dryer, to check whether the machine can operate stably.
5. Don't overload your work. In normal operation, do not put too much material into the sand washing machine, as this will increase the workload of the sand washing machine and easily cause problems.
The disposal capacity of the wheeled sand washing machine is relatively small, and the amount of sand particles lost during the cleaning process is small, without requiring excessive use of water resources. It is usually suitable for small and medium-sized sand production consumption lines. The sand washing machine is a type of water washing equipment, so its operation cannot be separated from water. When choosing the location of the device, please try to be as close to the water source as possible. For safety reasons, the location where the sand washing machine is installed should have better engineering geological conditions as much as possible to prevent construction under faults, landslides, and water levels.